Over the past eight years of selling security cameras and providing surveillance solutions, one of the most common problems in executing a correct and timely installation is pole mounting your new cameras.
There is still a disconnect on this issue from the manufactures end. They only provide camera installation mounts for the most common camera location installations. Recently a camera manufacture mentioned to me,
"Because locations on, in or around a facility can very so much it's hard to invest in a design for every conceivable location the end user wants for their camera. We're just concerned that our ROI for many different mounts would take forever." - Undisclosed Camera Manufacture
I understand their point of view but certain installation locations at the end users facility have been a common enough problem over the past 5 years to the point they should offer a solution. This seems to be a niche to where a manufacture can offer a solution to the end user and may help to be a preferred camera brand for the installation contractor.
A common installation problem - Pole Mounting! (Check out Blog post for Corner Mounting).
Because this has been such a common problem a company who manufactures no cameras and sells no cameras has identified this as excellent opportunity in providing another installation solution to their contractor customers.
Arlington Industries offers a pole mount box that fits on a rigid pipe that is three to six inches in diameter. Not only can you attach a security camera but you can install detectors, electrical accessories, flood lights and so on.
The Arlington 8161PM will hold up to 50 pounds and is made of a non-metallic, UV rated material for long outdoor life. Excellent for interior, exterior, dry, damp or wet locations.
I've been asked for a pole mount solution for a long time and finally, I can offer a solution that also works with many different brands of cameras.
Comment below. Thanks!
"By Mercy Salinas"
There is still a disconnect on this issue from the manufactures end. They only provide camera installation mounts for the most common camera location installations. Recently a camera manufacture mentioned to me,
"Because locations on, in or around a facility can very so much it's hard to invest in a design for every conceivable location the end user wants for their camera. We're just concerned that our ROI for many different mounts would take forever." - Undisclosed Camera Manufacture
I understand their point of view but certain installation locations at the end users facility have been a common enough problem over the past 5 years to the point they should offer a solution. This seems to be a niche to where a manufacture can offer a solution to the end user and may help to be a preferred camera brand for the installation contractor.
A common installation problem - Pole Mounting! (Check out Blog post for Corner Mounting).
Because this has been such a common problem a company who manufactures no cameras and sells no cameras has identified this as excellent opportunity in providing another installation solution to their contractor customers.
Arlington Industries offers a pole mount box that fits on a rigid pipe that is three to six inches in diameter. Not only can you attach a security camera but you can install detectors, electrical accessories, flood lights and so on.
The Arlington 8161PM will hold up to 50 pounds and is made of a non-metallic, UV rated material for long outdoor life. Excellent for interior, exterior, dry, damp or wet locations.
I've been asked for a pole mount solution for a long time and finally, I can offer a solution that also works with many different brands of cameras.
Comment below. Thanks!
"By Mercy Salinas"
No comments:
Post a Comment